Xcursor is a simple library designed to help locate and load cursors.
Cursors can be loaded from files or memory. A library of common
cursors exists which map to the standard X cursor names. Cursors can
exist in several sizes and the library automatically picks the best
size.
Xcursor is built in a couple of layers; at the bottom layer is code
which can load cursor images from files. Above that is a layer which
locates cursor files based on the library path and theme. At the top
is a layer which builds cursors either out of an image loaded from a
file or one of the standard X cursors. When using images loaded from
files, Xcursor prefers to use the Render extension CreateCursor request
if supported by the X server. Where not supported, Xcursor maps the
cursor image to a standard X cursor and uses the core CreateCursor
request.
Xcursor defines a new format for cursors on disk. Each file holds one
or more cursor images. Each cursor image is tagged with a nominal size
so that the best size can be selected automatically. Multiple cursors
of the same nominal size can be loaded together; applications are
expected to use them as an animated sequence.
Cursor files are stored as a header containing a table of contents
followed by a sequence of chunks. The table of contents indicates the
type, subtype and position in the file of each chunk. The file header
looks like:
magic: CARD32 "Xcur" (0x58, 0x63, 0x75, 0x72)
header: CARD32 bytes in this header
version: CARD32 file version number
ntoc: CARD32 number of toc entries
toc: LISTofTOC table of contents
Each table of contents entry looks like:
type: CARD32 entry type
subtype: CARD32 type-specific label - size for images
position: CARD32 absolute byte position of table in file
Each chunk in the file has set of common header fields followed by
additional type-specific fields:
header: CARD32 bytes in chunk header (including type-specific fields)
type: CARD32 must match type in TOC for this chunk
subtype: CARD32 must match subtype in TOC for this chunk
version: CARD32 version number for this chunk type
There are currently two chunk types defined for cursor files; comments
and images. Comments look like:
header: 20 Comment headers are 20 bytes
type: 0xfffe0001 Comment type is 0xfffe0001
subtype: { 1 (COPYRIGHT), 2 (LICENSE), 3 (OTHER) }
version: 1
length: CARD32 byte length of UTF-8 string
string: LISTofCARD8 UTF-8 string
Images look like:
header: 36 Image headers are 36 bytes
type: 0xfffd0002 Image type is 0xfffd0002
subtype: CARD32 Image subtype is the nominal size
version: 1
width: CARD32 Must be less than or equal to 0x7fff
height: CARD32 Must be less than or equal to 0x7fff
xhot: CARD32 Must be less than or equal to width
yhot: CARD32 Must be less than or equal to height
delay: CARD32 Delay between animation frames in milliseconds
pixels: LISTofCARD32 Packed ARGB format pixels
Xcursor (mostly) follows the freedesktop.org spec for theming icons.
The default search path it uses is
~/.local/share/icons, ~/.icons, /usr/share/icons,
/usr/share/pixmaps
Within each of these directories, it searches for a directory using the
theme name:
o Within the theme directory, it looks for cursor files in the
"cursors" subdirectory.
Xcursor looks for a specific file, which must be one of the cursor
shape names, e.g., as used in XcursorLibraryLoadImage or
XcursorLibraryShape.
o If it finds no matching cursor file in the "cursors" subdirectory,
Xcursor next looks for an "index.theme" file in each theme
directory to look for inherited themes. Those are lines in this
format:
Inherits = theme-name
Xcursor uses the first inherited theme-name, ignoring others which
may exist in a given "index.theme" file. If it finds an inherited
theme, Xcursor searches along the path to use that as well.
Xcursor ignores other keys in the "index.theme" file, including
"Name" (i.e., the name which a graphical application may use as the
presentation name).
If no theme is set, or if no cursor is found for the specified theme
anywhere along the path, Xcursor checks the "default" theme.
When Xcursor finds a cursor file, it stops searching. It always uses
the first cursor file found while searching along the path.
XcursorImage
holds a single cursor image in memory. Each pixel in the cursor
is a 32-bit value containing ARGB with A in the high byte.
typedef struct _XcursorImage {
XcursorDim size; /* nominal size for matching */
XcursorDim width; /* actual width */
XcursorDim height; /* actual height */
XcursorDim xhot; /* hot spot x (must be inside image) */
XcursorDim yhot; /* hot spot y (must be inside image) */
XcursorPixel *pixels; /* pointer to pixels */
} XcursorImage;
XcursorImages
holds multiple XcursorImage structures. They are all freed when
the XcursorImages is freed in XcursorImagesDestroy.
typedef struct _XcursorImages {
int nimage; /* number of images */
XcursorImage **images; /* array of XcursorImage pointers */
} XcursorImages;
XcursorCursors
Holds multiple Cursor objects. They're all freed when the
XcursorCursors is freed. These are reference counted so that
multiple XcursorAnimate structures can use the same
XcursorCursors.
typedef struct _XcursorCursors {
Display *dpy; /* Display holding cursors */
int ref; /* reference count */
int ncursor; /* number of cursors */
Cursor *cursors; /* array of cursors */
} XcursorCursors;
XcursorAnimate
References a set of cursors and a sequence within that set.
Multiple XcursorAnimate structures may reference the same
XcursorCursors; each holds a reference which is removed when the
XcursorAnimate is freed.
typedef struct _XcursorAnimate {
XcursorCursors *cursors; /* list of cursors to use */
int sequence; /* which cursor is next */
} XcursorAnimate;
XcursorFile
Xcursor provides an abstract API for accessing the file data.
Xcursor provides a stdio implementation of this abstract API;
applications are free to create additional implementations.
These functions parallel the stdio functions in return value and
expected argument values; the read and write functions flip the
arguments around to match the POSIX versions.
typedef struct _XcursorFile {
void *closure;
int (*read) (XcursorFile *file, unsigned char *buf, int len);
int (*write) (XcursorFile *file, unsigned char *buf, int len);
int (*seek) (XcursorFile *file, long offset, int whence);
};
XcursorImage *XcursorImageCreate (
int width,
int height)
void XcursorImageDestroy (
XcursorImage *image)
Allocate and free images. On allocation, the hotspot and the
pixels are left uninitialized. The size is set to the maximum
of width and height.
XcursorImages *XcursorImagesCreate (
int size)
void XcursorImagesDestroy (
XcursorImages *images)
Allocate and free arrays to hold multiple cursor images. On
allocation, nimage is set to zero.
XcursorCursors *XcursorCursorsCreate (
Display *dpy,
int size)
void XcursorCursorsDestroy (
XcursorCursors *cursors)
Allocate and free arrays to hold multiple cursors. On
allocation, ncursor is set to zero, ref is set to one.
XcursorImage *XcursorLibraryLoadImage (
const char *name,
const char *theme,
int size)
XcursorImages *XcursorLibraryLoadImages (
const char *name,
const char *theme,
int size)
These search the library path, loading the first file found of
the desired size, using a private function (XcursorScanTheme) to
find the appropriate theme:
o If theme is not NULL, use that.
o If theme is NULL, or if there was no match for the desired
theme, use "default" for the theme name.
o If neither search succeeds, these functions return NULL.
The two functions differ by more than the number of images
loaded:
o XcursorLibraryLoadImage calls XcursorFileLoadImage but
o XcursorLibraryLoadImages calls XcursorFileLoadImages, and
(on success) it calls XcursorImagesSetName to associate name
with the result.
const char * XcursorLibraryPath (void)
Returns the library search path:
o If the environment variable XCURSOR_PATH is set, return that
value.
o Otherwise, return the compiled-in search path.
int XcursorLibraryShape (
const char *library)
Search Xcursor's table of cursor font names for the given "shape
name" (library):
o If found, return the index into that table, multiplied by
two (to account for the source- and mask-values used in an X
cursor font).
o If not found, return -1.
Cursor XcursorFilenameLoadCursor (
Display *dpy,
const char *file)
XcursorCursors *XcursorFilenameLoadCursors (
Display *dpy,
const char *file)
These load cursors from the specified file.
Cursor XcursorLibraryLoadCursor (
Display *dpy,
const char *name)
XcursorCursors *XcursorLibraryLoadCursors (
Display *dpy,
const char *name)
These load cursors using the specified library name. The theme
comes from the display.
Cursor XcursorImageLoadCursor(
Display *dpy,
const XcursorImage *image)
This creates a cursor, given the image to display. It calls
XcursorSupportsARGB to decide what type of cursor to create:
o XRenderCreateCursor is used if ARGB is supported on the
display, and
o XCreatePixmapCursor is used otherwise.
Cursor XcursorImagesLoadCursor(
Display *dpy,
const XcursorImages *images)
This provides an interface for creating animated cursors, if the
images array contains multiple images, and if
XcursorSupportsAnim returns true. Otherwise, it calls
XcursorImageLoadCursor.
XcursorCursors *XcursorImagesLoadCursors(
Display *dpy,
const XcursorImages *images)
This calls XcursorCursorsCreate to create an array of
XcursorCursors, to correspond to the XcursorImages images array,
and uses XcursorImageLoadCursor to load the corresponding cursor
data.
Normally it returns the resulting array pointer. On any
failure, it discards the result XcursorCursorsDestroy, and
returns NULL.
XcursorImage *XcursorShapeLoadImage (
unsigned int shape,
const char *theme,
int size)
XcursorImages *XcursorShapeLoadImages (
unsigned int shape,
const char *theme,
int size)
These map shape to a library name using the standard X cursor
names and then load the images.
Cursor XcursorShapeLoadCursor (
Display *dpy,
unsigned int shape)
XcursorCursors *XcursorShapeLoadCursors (
Display *dpy,
unsigned int shape)
These map shape to a library name and then load the cursors.
XcursorComment *XcursorCommentCreate (
XcursorUInt comment_type,
int length)
XcursorXcFileLoad uses this function to allocate an
XcursorComment structure for a single cursor. The comment_type
parameter is used as the subtype field, e.g., COPYRIGHT. The
length is the number of bytes to allocate for the comment text.
void XcursorCommentDestroy(
XcursorComment *comment)
Deallocates the given XcursorComment structure.
XcursorComments * XcursorCommentsCreate (
int size)
XcursorXcFileLoad uses this function to allocate an index of
XcursorComment structure pointers. The size parameter tells it
how many pointers will be in the index.
void XcursorCommentsDestroy (
XcursorComments *comments)
Deallocates the given XcursorComments structure as well as the
XcursorComment structures which it points to.
XcursorAnimate * XcursorAnimateCreate (
XcursorCursors *cursors)
Wrap the given array of cursors in a newly allocated
XcursorAnimate structure, which adds a sequence number used in
XcursorAnimateNext.
void XcursorAnimateDestroy (
XcursorAnimate *animate)
Discards the given animate data, freeing both the XcursorCursors
array of cursors as well as the XcursorAnimate structure.
Cursor XcursorAnimateNext (
XcursorAnimate *animate)
Cyclically returns the next Cursor in the array, incrementing
the sequence number to prepare for the next call.
The caller is responsible for displaying the series of Cursor
images. Xcursor does not do that.
The X11 XCreateFontCursor and XCreateGlyphCursor functions use this
part of the API to extend the X core cursors feature to use themes.
void XcursorImageHash (
XImage *image,
unsigned char hash[XCURSOR_BITMAP_HASH_SIZE])
Compute a hash of the image, to display when the environment
variable XCURSOR_DISCOVER is set.
void XcursorImagesSetName (
XcursorImages *images,
const char *name)
Associates the given name with the images.
void XcursorNoticeCreateBitmap (
Display *dpy,
Pixmap pid,
unsigned int width,
unsigned int height)
Check if the display supports either ARGB or themes, and also if
the image size fits within the maximum cursor size (64 pixels).
If so, create a bitmap of the specified size, and cache the
result in Xcursor, identifying it with the Pixmap-id (pid)
value.
void XcursorNoticePutBitmap (
Display *dpy,
Drawable draw,
XImage *image)
Update the image contents in the bitmap specified by the draw
value (a Pixmap-id). The bitmap must have been created by
XcursorNoticeCreateBitmap.
Cursor XcursorTryShapeBitmapCursor (
Display *dpy,
Pixmap source,
Pixmap mask,
XColor *foreground,
XColor *background,
unsigned int x,
unsigned int y)
If the display supports either ARGB or themes, try to load a
cursor into Xcursor's cache using the source parameter as a
Pixmap-id. The source may no longer be in the cache. Xcursor
uses the hash value to identify the desired image.
Cursor XcursorTryShapeCursor (
Display *dpy,
Font source_font,
Font mask_font,
unsigned int source_char,
unsigned int mask_char,
XColor _Xconst *foreground,
XColor _Xconst *background)
If the display supports either ARGB or themes, try to load a
cursor into Xcursor's cache using the source_char parameter as a
shape. Using
o the default size from XcursorGetDefaultSize,
o the default theme from XcursorGetTheme, and
o the source_char parameter as a shape,
Xcursor calls XcursorShapeLoadImages to load the cursor images.
If successful, Xcursor uses XcursorImagesLoadCursor to load the
cursor information.
XcursorBool XcursorSupportsARGB (
Display *dpy)
Returns true if the display supports ARGB cursors. Otherwise,
cursors will be mapped to a core X cursor.
XcursorBool XcursorSupportsAnim (
Display *dpy)
Returns true if the display supports animated cursors.
Otherwise, cursors will be mapped to a core X cursor.
XcursorBool XcursorSetDefaultSize (
Display *dpy,
int size)
Sets the default size for cursors on the specified display. When
loading cursors, those whose nominal size is closest to this
size will be preferred.
int XcursorGetDefaultSize (
Display *dpy)
Gets the default cursor size.
XcursorBool XcursorSetTheme (
Display *dpy,
const char *theme)
Sets the current theme name.
char *XcursorGetTheme (
Display *dpy)
Gets the current theme name.
XcursorBool XcursorGetThemeCore (
Display *dpy)
XcursorBool XcursorSetThemeCore (
Display *dpy,
XcursorBool theme_core)
Get or set property which tells Xcursor whether to enable themes
for core cursors.
Environment variables can be used to override resource settings, which
in turn override compiled-in default values.
Some of the environment variables recognized by Xcursor are booleans,
specified as follows:
true for "t", "1", "y" or "on"
false for "f", "0", "n" or "off"
Xcursor ignores other values for these booleans.
HOME Xcursor interprets "~" in the search list as the home
directory, using this variable rather than the password
database.
XCURSOR_ANIM If the display supports the Render CreateCursor request,
and the Render feature is enabled, disable animated
cursors if the environment variable is false.
If the environment variable is not given, Xcursor uses
the resource Xcursor.anim.
XCURSOR_CORE If the display supports the Render CreateCursor request
disable the Render feature if the environment variable
is false.
If the environment variable is not given, Xcursor uses
the resource Xcursor.core.
XCURSOR_DISCOVER
If the variable is set, Xcursor turns on a logging
feature. It displays the hash value and the image so
that users can see which cursor name is associated with
each image.
There is no corresponding resource setting.
XCURSOR_DITHER This variable sets the desired dither.
If the environment variable is not given, Xcursor uses
the resource Xcursor.dither.
If neither environment variable or resource is found,
Xcursor uses "threshold"
These are the recognized values:
diffusemedianorderedthresholdXCURSOR_PATH This variable sets the list of paths in which to search
for cursors, rather than the compiled-in default list.
Directories in this path are separated by colons (:).
XCURSOR_SIZE This variable sets the desired cursor size, in pixels.
If the environment variable is not given, Xcursor tries
the Xcursor.size resource.
If no size is given, whether by environment variable or
resource setting, Xcursor next tries the Xft.dpi
resource setting to guess the size of a 16-point cursor.
Finally, if Xft.dpi is not set, Xcursor uses the display
height, dividing by 48 (assuming that the height is
768).
XCURSOR_THEME This variable selects the desired theme.
If the environment variable is not given, Xcursor tries
the Xcursor.theme resource.
If neither environment variable or resource is found,
Xcursor uses the default theme.
XCURSOR_THEME_CORE
Enables themes for core cursors if the environment
variable is true.
If the environment variable is not given, Xcursor tries
the Xcursor.theme_core resource.
An application can enable or disable themes using
XcursorSetThemeCore.